Water Cooler Condenser Shell and Tube Heat Exchangers Manufacturer INDIA

Shell and TubeShell and Tube Heat Exchanger is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. They are classified into fixed and Floating type Heat Exchangers . Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids.The Floating type Heat Exchangers has the advantages of removability of tube bundle & access for cleaning both inner and outer side of tubes and shell. Shell and tube heat exchangers consist of a series of tubes. One set of these tubes contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required. In this type, the tube sheets are completely welded to the shell and acted as shell flanges.

Applications :

Shell Tube Heat Exchanger is widely used in variety of application as a cooling solution. With the right coimbination of materials Shell and Tube Heat Exchanger can also be used to cool or heat other mediums, such as swimming pool water or charge air.The most common amoung them is for cooling of Hydraulic Fluid and oil in engines, transmissions and hydraulic power packs. One of the big advantages of using a shell and tube heat exchanger is that Shell and Tube Heat Exchanger are often easy to service, particularly with models where a floating tube bundle (where the tube plates are not welded to the outer shell) is available. Can also be used on fixed tube sheet heat exchangers

U-Tube Heat Exchanger

U Tube bundle  Heat ExchangerIn nuclear power plants called pressurized water reactors, large heat exchangers called steam generators are two-phase, shell and tube heat exchangers which typically have U-tubes. They are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power. Most shell-and-tube heat exchangers are either 1, 2, or 4 pass designs on the tube side. This refers to the number of times the fluid in the tubes passes through the fluid in the shell. In a single pass heat exchanger, the fluid goes in one end of each tube and out the other.

Fixed Tube Sheet Heat Exchangers

Fixed Tube Sheet Heat ExchangerIn nuclear power plants called pressurized water reactors, large heat exchangers called steam generators are two-phase, shell and tube heat exchangers which typically have U-tubes. They are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power. Most shell-and-tube heat exchangers are either 1, 2, or 4 pass designs on the tube side. This refers to the number of times the fluid in the tubes passes through the fluid in the shell. In a single pass heat exchanger, the fluid goes in one end of each tube and out the other.

Vertical Shell and Tube Heat Exchanger

Vertical Shell and Tube Vertical Shell and Tube Heat Exchanger is a heat exchanger that is derived from its parent Shell and Tube Heat Exchanger and it is most commonly all Industries which involves higher-pressure and Higher Temperature applications.

Stainless Steel Shell and Tube Heat Exchanger

Stainless Steel Shell and Tube Heat ExchangerStainless Steel Shell and Tube Heat Exchanger Stainless steel is used where both the properties of steel and fighting to corrosion are mandatory. Stainless steel differs from carbon steel by the amount of chromium present. Open to attack carbon steel rusts readily when exposed to air and moisture.

Copyright 2016 Air Fin cooler. All rights reserved.