Water Cooler Condenser Air Cooled Heat Exchangers Manufacturer INDIA

Air cooled Exchangers Air-cooled heat exchangers generally used where a process system generates heat which must be removed, for which there is no local use. A good example is the radiator in your car. The engine components must be cooled to keep them from overheating due to friction & the combustion process. The excess heat is carried away by the water and glycol coolant mixture. A small amount of the excess heat may be used by the car's radiator to heat the interior. Most of the heat must be dissipated. One of the simplest ways is to use the ambient air. Air-cooled heat exchangers (often simply called air-coolers) do not require any cooling water from a cooling towers. They are usually used when the outlet temperature is more than about 20 deg. F above the maximum expected ambient air temperature. They can be used with closer approach temperatures, but often become expensive compared to a combination of a cooling tower and a water-cooled exchanger. Typically, an air-cooled exchanger for process use consists of a finned-tube bundle with rectangular box headers on both ends of the tubes. Cooling air is provided by one or more fans. Usually, the air blows upwards through a horizontal tube bundle.

The fans are usually driven be electric motors through some type of speed reducer. The speed reducers are usually either V-belts, HTD drives, or right angle gears. The fan drive assembly is supported by a steel mechanical drive support system. They usually include a vibration switch on each fan to automatically shut down a fan which has become imbalanced for some reason The fans can be either forced or induced draft, depending on whether the air is pushed or pulled through the tube bundle. The space between the fan(s) and the tube bundle is enclosed by a plenum chamber which directs the air. The whole assembly is usually mounted on legs or a piperack. The air-cooled heat exchangers are mostly used when the plant location and the ambient conditions do not allow an easy and economic use of other cooling system.

The most evident advantages of air-cooled heat exchanger are:

No problem arising from thermal & chemical pollution of cooling fluids.

Flexibility for any plant location and plot plan arrangement(installation over other units).

Reduction of maintenance costs.

Easy installation by bolted assembly.

Lower environmental impact than shell and tube heat exchangers thanks to the elimination of an auxiliary water supply.

Copyright 2016 Air Fin cooler. All rights reserved.